Simultaneous quantitative analysis of ketanserin and ketanserinol in plasma by RP-HPLC with fluorescence detection

A sensitive and selective high-performance liquid chromatographic assay for the quantification of ketanserin and ketanserinol in human plasma was developed and validated. The procedure involves extraction of ketanserin and ketanserinol from plasma using an Extrelut NT-1 solid-phase extraction column. The chromatograph was equipped with a Hypersil BDS column (100 x 4.5 mm, 3 micro m particle size). Separation was performed with a mixture of acetate buffer 0.01 M, pH 4.9-methanol-acetonitrile (52:40:8, v/v/v). Detection was performed with fluorescence detection (lambda(ex) = 332 nm and lambda(em) = 410 nm). Calibration curves were linear (r(2) = 0.999) in the range 0-400 ng/mL for both ketanserin and ketanserinol. The repeatability coefficient for ketanserin and ketanserinol was 3.1 and 3.0%, respectively. The reproducibility coefficient for ketanserin and ketanserinol was 10.5 and 9.1%, respectively. The limit of quantification for both ketanserin and ketanserinol was 2.0 ng/mL. The mean recovery yield for both ketanserin and ketanserinol was 60%. In an 8 h work day approximately 60 samples, including calibration and reference standards, could be processed.     

由NO分子从头计算结果和紫外光电子能谱确定NO的分子结构

对于NO分子轨道的能级次序现有两种不同的说法,不少人根据NO与O_2~+是等电子体,由O_2~+分子的能级次序确定NO分子组态。本文用NO和O_2~(+)从头计算结果以及NO的紫外光电子能谱相结合的方法说明NO的5σ轨道是弱成键轨道,5σ的轨道能稍高于1π轨道能,也就是说NO的能级次序是与N_2分子相同的;NO与O_2~+虽是等电子体,但是能级次序并不相同,因此由O_2~+的能级次序确定NO分子的电子组态是不妥的。     

Gas chromatographic analysis of traces of hydrogen sulfide in hydrogen

Summary A simple gas chromatographic method has been developed for analysis of hydrogen sulfide in hydrogen at the 0.5 to 100 ppm level. After enriching the traces of hydrogen sulfide by absorption in a gas loop packed with the chosen column support at 77 K it was determined by using a Chromosorb G column with silicone 550 and phthalic anhydride as liquid phases, hydrogen as carrier gas and a thermal conductivity detector. The detection limit was found to be about 0.5 ppm of hydrogen sulfide.     

Structure and Aromaticity of AlCO-substituted Semibullvalene

The structures, energies and aromaticity (the nuclear-independent chemical shifts, NICS) of AlCO-substituted semibullvalenes were investigated at the B3LYP/6-311+G** level. Similar to BCO-substituted analogues, [2,6]-AlCO-semibullvalene is neutral bishomoaromatic. The NICS values reveal that the aromaticity of AlCO-substituted structures is smaller than that of BCO analogues.     

C30卡宾三叶结分子结构与稳定性的理论研究

三叶结分子是最简单的非平凡纽结分子, C₃₀卡宾三叶结分子是由一条闭合的(C≡C—)₁₅ sp杂化碳链组成的, 是具有D₃对称性的拓扑手性分子. 本文用密度泛函方法[DFT/RB3LYP/6-31G(D)]对分子结构和光谱性质进行了研究, 在优化构型的基础上通过自然键轨道(NBO)方法和轨道能级研究了它的共轭性、成键情况和稳定性, 并与平面型C₃₀卡宾环分子进行了比较. 计算结果表明三叶结分子的三叶弧上形成了非平面的C≡C共轭和扭曲的内螺旋结构, 交叉处具有弱成键作用, 且分子轨道也发生了扭曲; 三叶结分子比卡宾环的共轭性和赝Jahn-Teller效应都明显小, 而总能量高. 因此, 分子打结是一个能量升高的过程.     

DOPING LEVEL INCREASE OF POLY(3-METHYLTHIOPHENE)FILM DURING ELECTROCHEMICAL POLYMERIZATION PROCESS

The Raman spectra of poly(3-methylthiophene) (PMeT) films with different thicknesses, which have beenelectrochemically deposited on a flat stainless steel electrode surface by direct oxidation of 3-methylthiophene in borontrifluoride diethyl etherate (BFEE) at a constant applied potential of 1.38 V (versus SCE), have been investigated byexcitation with a 633-nm laser beam. The spectroscopic results demonstrated that the doping level of PMeT film wasincreasing during film growth. This finding was also confirmed by electrochemical examination. Moreover, the Raman bandsassigned to radical cations and dications in doped PMeT films were found approximately at 1420 and 1400 cm~(-1),respectively. Radical cations and dications coexist on the backbone of PMeT as conductive species and their concentrationsincrease with the increase of doping level. Successive cyclic voltammetry was proved to be an effective approach toimproving the doping level of as-grown thin compact PMeT film.     

Ru_n(n=2~8)金属团簇的结构和能级分布的DFT研究

采用密度泛函理论中的广义梯度近似(DFT/GGA)方法,对Run团簇(n = 2~8)的几何结构与稳定性、束缚能以及能级分布的关系进行了研究,并分析了随着团簇原子数的增加,团簇的几何结构和费米能级的变化,结果表明:Ru簇的几何结构在4个原子以前是平面结构,而从5个原子开始为空间立体的稳定结构,束缚能随金属原子数的增加而增加。能级结构呈明显的分立特征,费米能级随原子个数的增加而增加,但从Ru7开始又有所降低,且团簇的能量间隙逐渐减小,趋近于大块金属的能级特征。     

Synthesis and characterization of 1,3,4-oxadiazole derivatives containing alkoxy chains with different lengths

The synthesis, optical properties, electrochemical properties, electronic structures and applications in electroluminescent device of three series of 1,3,4-oxadiazole derivatives, 1,4-bis[(4-methylphenyl)-1,3,4-oxadiazolyl]phenylene (OXD₁), 5,5′-di-(4-methyl)-2,2′-p-(2,5-bisalkoxyphenylene)-bis-1,3,4-oxadiazole (OXD_2–n) and 1,4-bis[(4-alkoxyphenyl)-1,3,4-oxadiazolyl]phenylene (OXD_3–n) are reported. The molecular structures of the oxadiazole compounds were confirmed by FT-IR, ¹H NMR spectroscopy and elemental analysis. The optical and electrochemical properties of the compounds were investigated by UV–vis absorption and photoluminescence spectroscopy as well as cyclic voltammetry. The results show that introduction of two alkoxy groups whose electron-donating ability is stronger than that of methyl groups increases the electron density of the conjugated segment of OXD_2–n (with side-on alkoxy substituents) and OXD_3–n (with end-on alkoxy substituents), and thus leads to the absorption maximum bathochromic-shift compared to that of OXD₁. The HOMO and LUMO energy levels of the compounds studied are in the range of −2.78 to −2.89 and −5.75 to −6.20 eV. Calculations on the representative compounds by the Dmol³ package of MS Modeling 3.0 revealed that the increase of energy levels in both OXD_2–n and OXD_3–n was due to the change of the frontier molecular orbital distribution in the central benzene ring. The light-emitting devices have been fabricated using blends of MEH-PPV and these compounds as emissive layers, among which, maximum brightness up to 11810 cd m⁻² (8.5 V) has been observed, which is 40 times brighter than that with MEH-PPV. The result of the devices suggested that oxadiazole derivatives studied function well as electron-transporting materials and can be used in LEDs, and thus to enhance the efficiency of LEDs.     

MEASUREMENTS OF CHAIN INTERPENETRATION OF POLYMER GLASSES

The concept of entanglement provides the basis of our current understanding of the flow behavior of polymer melts, Current techniques developed to investigate the degree of interpenetration of polymer chains only provide indirectly the information of the degree of entanglement in a relatively large scale （several to tens of nanometer）. In this article, we report ^1H-NMR spectroscopy with dipolar filters under fast magic angle spinning for probing chain interpenetration of polymer glasses at the molecular level.